Compression Test： Definition, Purpose, Applications, and How Does it Work

Compression testing is a widely used mechanical test that provides valuable insights into the behavior of materials when subjected to compressive loads. The test is essential in selecting the right material for various applications in industries such as aerospace, automotive, and construction. This article will delve into the definition, purpose, applications, and how compression testing works, as well as the steps involved in performing a compression test.

What Is a Compression Test?

A compression test is a mechanical test used to determine the behavior of materials when subjected to compressive loads. The data collected from compression tests give helpful insights into the mechanical properties of different materials which are invaluable in selecting the right material for different applications, especially in the construction and engineering industries. 

How Does Compression Testing Work?

In a compression test, a sample of the material is placed between two plates or jaws of a testing machine. A compressive force is applied to the sample until it reaches a specific deformation or until it fractures. The machine, a deflectometer or an extensometer, can be used to measure the deflection or strain of the sample.

What Is the Purpose of Compression Testing?

Compression testing's objective is to ascertain a material's behavior or response to a compressive load by measuring key parameters such as strain, stress, and deformation. Compressive testing allows for the determination of a material's compressive strength, ultimate strength, yield strength, elastic modulus, and elastic limit among other properties. Once these various factors and the values associated with a particular material are understood, it is possible to assess whether or not the material is suitable for a given application or whether it will fail under the given stresses.

When Are Compression Tests Used?

Compression tests are used to demonstrate how a material will respond to compression. They can be used to assess a material's plastic flow behavior and ductile fracture limits. They also determine how a material responds to crushing loads. Compression tests are crucial for assessing the elastic and compressive fracture characteristics of brittle or low-ductility materials.

The modulus of elasticity, compressive yield point, proportional limit, compressive strength, and compressive yield strength can all be determined by compression experiments. These characteristics play a key role in figuring out if a material is suitable for a given application or will fail under a given set of pressures. 

Where Are Compression Tests Applied?

There are several industries in which compression tests are used. Some of the main industries are listed below:

1. Aerospace and Automotive Industry

Compression tests are an essential part of the aerospace and automotive industry. They are used to measure the compressive strength of materials used in engine components, structural components, and other critical parts. For example, in the aerospace industry, compression tests are used to test the strength of materials used in the manufacturing of aircraft wings, fuselages, and engine parts. In the automotive industry, compression tests are used to test the strength of materials used in the manufacturing of engine blocks, crankshafts, springs, and other components.

2. Construction Industry

In the construction industry, compression tests are used to determine the compressive strength of concrete, cement, and other building materials. These tests are critical to ensure that the building materials meet the required strength standards and can withstand the weight and pressure of the structure. Compression testing is also used to measure the flexural strength of roofing panels, insulating boards, and sheet materials for building and to do penetration tests for plasterboard, pipelines, and shotcrete.

3. Cosmetics Industry

Compression tests are an important part of the cosmetic industry, and are used in the following ways:

• Sprays and dispensing pumps are tested for actuator force.
• Lipstick, lip balm, and eyeliner break strength tests.
• Strength of eye shadows and powder compacts when compacted.
• Gauging the power required to distribute creams and lotions from bottles and sachets.

4. Electrical and Electronics Industry

In the electrical and electronics industry, compression tests are used to test the compressive strength of insulators, connectors, LCD screens, keypads, and other components. These tests are critical to ensure that the components can withstand the pressure and weight of other components and devices without breaking or degrading over time.

5. Medical Device Industry

The medical industry is another industry that has many uses for compression testing. Some of these include:

• The three-point bend test for needles.
• Metered-dose inhalers and pen injectors' actuator force tests.
• Scalpel and needle sharpness, insertion, and penetration force testing.
• Syringe plunger actuation and evaluation of "travel" force.

6. Packaging Industry

In the packaging industry, compression tests are used to test the compressive strength of cardboard, paperboard, and other packaging materials. These tests are critical to ensure that the packaging can withstand the weight and pressure of the products inside without breaking or tearing.

7. Paper and Board Industry

Compression tests are performed in the paper and board industry to test the compression strength of cardboard. 

8. Plastics, Rubber, and Elastomers Industry

Compression testing in the rubber, plastic, and elastomer industry mainly includes the identification of a polymer's flexural characteristics using a three-point bend test. 

9. Safety, Health, Fitness, and Leisure Industry

Some of the applications of compression testing in the safety, health, fitness, and leisure industry include:

• Testing the effectiveness of tennis, golf, and cricket balls.
• Car seat safety harness compression testing.

How To Perform a Compression Test?

Compressive testing works by subjecting a material to a compressive force until it reaches a specified deformation or until it fractures. The process typically involves the following steps:

• Preparation of the Sample: A sample of the material to be tested is selected and prepared according to the testing standard. The sample may be a cylindrical or cubical shape, depending on the requirements of the test.
• Mounting of the Sample: The sample is mounted between two plates or jaws of a testing machine. The machine may use hydraulic, pneumatic, or mechanical force to apply pressure to the sample.
• Application of Force: A compressive force is applied to the sample at a constant rate until it reaches a specified deformation or until it fractures. During the test, the applied force and the resulting deformation are measured and recorded.
• Analysis of the Results: The data collected during the test is used to calculate various properties of the material, including compressive strength, elastic modulus, and deformation characteristics.

What Is the Compression Test Equipment?

Testing devices with universal compatibility are used for compression tests. With force capacities ranging from 0.02 N to 2,000 kN, these devices are typically offered in a wide range of sizes. A universal testing device must be equipped with extensometers, application-specific platens, and testing software. A single machine may be adjusted to test any material within its force range by simply changing the fixturing, depending on the type of material being tested.

In a compression test, a sample of the material is sandwiched between two testing equipment plates or jaws and compressed to a predetermined distortion or until it cracks.

What Are the Common Compression Testing Results

The compression testing results will vary from material to material and also due to the desired properties for which the user is testing.

What Are the Types of Compression Testing?

The different types of compression testing are listed and discussed below:

1. Flexure/Bend

Flexure, also known as bending, is a type of compression test that is used to measure the strength and stiffness of a material under a bending load. This test is commonly used for materials such as metals, plastics, ceramics, and composites. It is an important method for evaluating the quality and durability of these materials.

The flexure test involves applying a load to a test specimen that is supported at two points and loaded at a third point. The load is applied perpendicular to the specimen, causing it to bend. The amount of deflection or deformation is measured and recorded, as is the load required to cause the deformation.

During the test, the material is subjected to both compressive and tensile stresses. The inside curve of the specimen experiences compressive stresses, while the outside curve experiences tensile stresses.

2. Spring Testing

Spring testing is a method of testing compression springs, in order to measure their performance characteristics. A spring is placed in a compression test machine and compressed until all coils are touching, and the machine then determines the following characteristics:

• Solid Height: The height of the spring when fully compressed.
• Maximum Load: The amount of force required to fully compress the spring.
• Free Length: The length of the spring under no load.
• Spring Rate: The amount of force required to compress the spring a certain distance.

3. Top-load/Crush

Top-load testing is performed by applying a downward force to a specimen to measure how it resists crushing. This can be performed on any type of specimen but is commonly used in the packaging industry to test the crush resistance of containers.

What Are the Compression Testing Standards?

There are many industry standards for compression tests, maintained by different organizations, such as:

• IEC 61300-2-11:199
• BS 7325:1990, BS ISO 844:2001, BS EN 12365-2:2003
• ISO 9895:1989, ISO 15527:2007, ISO 7743:2008
• ASTM E9-89a, ASTM D6713-01, ASTM C864-05

What Are the Benefits of a Compression Test?

There are numerous benefits to compression testing including:

• They are generally cost-effective when compared to other types of testing.
• Can be performed on a wide variety of materials.
• A well-established technique that can provide reliable results when performed correctly.

What Are the Limitations of a Compression Test?

There are some limitations to compression testing including:

• Only gives information about a material’s compressive strength, and nothing else.
• Can be time-consuming.
• Testing specimens have to be prepared in a very specific way, which can be costly and affect the accuracy of the results.
• The accuracy of results can be affected by environmental factors such as temperature, as well as operator error, such as loading the specimen incorrectly.

Are Compression Tests Accurate?

Yes, compression tests can be extremely accurate, as long as high-quality machines and testing procedures are used. There are various factors that can decrease the accuracy of tests though, such as: inconsistent test setups, low-quality machines, or uncalibrated machines. By mitigating these factors, it is possible to achieve very high accuracy with compression tests.

What Is the Difference Between Tension Testing and Compression Testing?

The difference between tension testing and compression testing is that with tension testing, a tensile stress, or pulling force is applied, With compression testing, on the other hand, a compression stress, or pushing force is applied.

Summary

This article presented compression tests, explained what they are, and discussed their purpose and types. To learn more about compression tests, contact a Xometry representative.

Xometry provides a wide range of manufacturing capabilities, including 3D printing and other value-added services for all of your prototyping and production needs. Visit our website to learn more or to request a free, no-obligation quote.

Disclaimer

The content appearing on this webpage is for informational purposes only. Xometry makes no representation or warranty of any kind, be it expressed or implied, as to the accuracy, completeness, or validity of the information. Any performance parameters, geometric tolerances, specific design features, quality and types of materials, or processes should not be inferred to represent what will be delivered by third-party suppliers or manufacturers through Xometry’s network. Buyers seeking quotes for parts are responsible for defining the specific requirements for those parts. Please refer to our terms and conditions for more information.